INDIA |
   | 1956 marked rework of a Wilkinson 1907, converted into a MkI** FR 56 mark shows last work to have been carried out in 1956 Original makers marks are still visible on ricasso |
  | Shortened GRI* marked for Drill purposes Ricasso stamps |
| MkII |
  | NWR made No1 MkII made by North West Railways |
   |
Previously unrecorded in the books a MIL made MKII
without a false edge. |
  | No1 MkII* made by MIL |
    | NoI MkII JU makers mark Scabbard made in 1942 so is probably original to blade Makers marks on chape |
    | MkIII without a false edge based on an RFI made MkII blade. Distinctive MkIII pommel is used as decider on bayonet designation |
    | SLR bayonet with long bowie blade RFI made in 1985 Has wooden wrap around grips rather than the plastic ones used by the UK Comparison of blade lengths between normal (upper) and long bowie blade. Comparison is with UK No8 but blade is common to SLR, No9 and N07 bayonets |

| INSAS AKM, of note is the very poor finish of this blade compared to western standards (and even the normal Eastern block finish) |
UNITED KINGDOM |
   | Vivian Carbine Bayonet made for the Vivian double barrelled carbine and used by Constabulary units. Baker style bayonet mount and regular impact marks on modern made FAKE modern stamps on pommel |
  | Converted French Gras reportedly for use by the Home Guard. It is identified as this by Kiesling tentatively and stated as such by ABC. Can anyone confirm this or offer a better identification Bushed muzzle ring to 15mm and modified frog stud on shortened scabbard |
   | Ross bayonet with 1WOL grip marks. Scabbard is marked to 255th Battalion of the CEF (Canadian Expeditionary Force), pommel has Canadian acceptance mark Throat of scabbard has serial number Cross guard has Enfield inspection stamp and WD arrow |
  | UK WWI production 1907 cut down to 10" complete with scabbard, the purpose and provenance is unknown Enfield EFD marking on spine of cut down bayonet |
 | No 5 MkII Jungle Carbine, made for shortened Enfield with large flash hider. MkI has only a single screw in the pommel. A similar blade with a small muzzle ring is the No8 |
  | Commercial No 5 with plastic riveted grips, there is also a version of this marked with STERLING in the fuller Close up of plastic grips |
 | Chromed L1A3 for parade use |
 | No 7 with swivelling socket with standard fitting for SMLE, limited use only, i.e. guards regiments |
 | No7 with black grips, I have yet to find a reason for the two colours but cannot believe that it is due to manufacturing variations and believe it must be for units or contracts. |
     | UK No8 one of only 2400 trials blades made Similar to the No5 but it has a small diameter muzzle ring Made in Poole in 1946 Pommel has Singer markings Scabbard has brass throat |
 | Trials FN bayonet X2E1, this was not selected and the L1A1 bayonet was adopted as the bayonet for the British SLR version of the FN FAL |
 | L1A1 for the British SLR rifle. The A1 version originally had a protruding press stud, these were later modified with a flush stud like the L1A3. There are long and short fuller versions of this blade |
 | L1A3. The L1A2 was a used by the Australians and Canadians. The A3 has a flush press stud and other minor modifications over the A1 |
 | L1A4 The final version of this bayonet with changes to ease and speed production |
 | Hilt markings of L1A4 |
 | L3A1 for SA 80. The L2A1 was only trialed |
  | L1A3 short fuller version in dress frog 1966 date of manufacture |
   | Composite trials scabbard for L1A1 in plastic dress frog Composite scabbard has a steel throat Body is of hard "plastic" |
 | L3A1 scabbards. top is dress version and lower is nylon replacement for plastic issue using the same spring clip mount |