UK Pattern 1907 Bayonets and Variations.

On this page I intend to outline the various 1907 pattern bayonets available to the collector, in much the same way as I have done for the AK pattern bayonets, and will use my collection and photographs from other collectors to illustrate the variations. This does not cover the later 1913, 1914 and 1917 bayonets which are effectively modifications of the 1907 to fit the US produced rifles. The listing below is by country

Austria,  Afghanistan, Australia, Canada, China, Egypt, Germany, India, Indonesia, Iran, Iraq, Italy,

  New Zealand, Norway, Siam, South Africa, TurkeyUK, Unknown

For more information, photographs and details I have compiled a CD on the P1907 specifically for collectors, covering the blades, scabbards, finishes etc. The index page has  information on ordering

1907 Leather
Total length = mm    Blade length = mmBlade width = MRD =  mm                           
Replacement scabbard leather for 1907 bayonet, made in 1945 and never used

Front end of SMLE with bayonet mount

 

Fitted to a 1907

 

 

"Muzzle ring" actually mounts on separate stud under barrel

 

With rifles destined for service overseas, weapons for training purposes were in short supply.  The development and use of a training rifle was necessary and inevitable. (normal is lowest picture)

 

The key difference is the shape of the sight protectors (i.e. the outward curve) and the design stacking swivel (not a sling swivel).

- Service weapons have straight or inwardly curved sight protectors

- The stacking swivel that is normally attached to the nose cap is attached with a screw and has an opening to permit stacking (interlocking) of 3 rifles.

These features alone are vastly different from service production versions and cannot be reworked or machined to transform it into a service part.

 

Other differences include...

- A forward sight would not be necessary if the nose cap was to be fitted for/to a rifle barrel.  

- The training version is cast iron, whereas the service version is steel. 

- The added "heft" was to help simulate the actual weight of the rifle.  

- Although a training version, the bayonet lug was added for bayonet training.

thanks to Brad Staples

WWI Grenade cup discharger mounted between the SMLE and the bayonet it locates the grenade correctly to be launched by a purpose made round fired from the rifle

Repro By Mark Simm

WWI wire breaker attachment designed to fit the 1903 and 1907 bayonet, by using a cam to allow for the blade width differences in the two blades. This adjusts the height of the wire V to align with the centre of the muzzle. Pictures show it fitted to both the 1903 and the 1907, fitting is sprung clip and the cam is set by aligning numbers (3 and 7) with matching numbers on the main section.

Parade tip for 1907 bayonet, designed to prevent flags snagging on the tip of mounted bayonets during parade duties

WWI Vigilant mirror, sold to act as "periscope" for troops in trenches, allowing them to see without being seen

 

Hinged clip on rear allows mirror to be attached to a bayonet or other object to get height or reach

Signal lamp from WWI designed to fit on a 1907 Bayonet. This allowed it to stick up above the trench parapet and the morse key for the lamp kept protected below the rampart

courtesy 'N FLITTER' e Bay ID '18FL'

UK 1907 scabbard  
 Seen previously as supplied by a fellow coellctor, I now have my own copy but still have no idea of where these were made or by whom, and for what. Any help is much appreciated, and they are not Siamese replacements beiong different made and much more substantial

 

AUSTRIA

A contract for Bayonets for the Austrian SMLE's used by the Police post WWI was placed and a new made modified 84/98 style blade with a muzzle ring. There is some discussion that these may be Israeli contract as well

 

Hilt and blade are very similar to the 84/98 but with a modified cross guard o fit the SMLE nose cap and slot.

courtesy of John Humphries

 

AFGHANISTAN

Locally made versions of the 1907 were made from steel stock and hand grinding. They also used UK made 1907's and P13's

 

 

Local made 1907

 

Grips are held on by brass rivets in the same fashion as the locally made 1888's

 

With post 1916 cleaning hole in the pommel

 

 

Edge is crudely made, the 45deg angle of the edge would never sharpen

 

 

Fullers are hand ground and different lengths on either side, edge finishes some distance from the cross guard

 

 

 

Fullers extend almost to the point of the blade

 

Tang tapers from blade thickness to the pommel

 

 

 

 

Although similar to the UK made fittings those on this scabbard differ in some details

 

 

 

Even mouth piece is hand cut

 

 

AUSTRALIA

Initial use of the 1907 was with UK produced models, these have the UK acceptance marks and the Australian acceptance (arrow in D, or D^D) marks on the pommel. Large numbers of UK made blades were used by the Australian services, and many early Australian made blades were made with parts shipped from the UK especially the wood grip panels.

Australia made the 1907 in both the original quillioned and un-quillioned forms. The Australian Quillion is of a slightly more square pattern than the UK made version and was produced for a longer period than in the UK where production finished in 1913. Early models were marked Lithgow, while in the 20's this was changed to MA, for Made in Australia, or latterly Munitions Australia. OA or Orange made blades were produced in WWII. Grips will be found stamped with SLAZ or SLAZENGER, whilst scabbards were made by MANGROVITE particularly during WWII. The  Australians made a scabbard during the 20's from two pieces of leather, which had stitching on both sides (double stitched), whilst this design was accepted in the UK only Australia made it in any numbers. 

The Australians authorised the grinding of a false edge on the back of their blades after 1944.

The Australians trialed three versions of modified 1907 bayonet to be used with the shortened carbine version of the No4 rifle. These had 6", 10" and 17" blades and were made in very small numbers. They all used the standard 1907 hilt and blade with a modified cross guard to fit around the No6 flash hider.

Cut down 1907 blades were used initially to make the first OWEN, machine gun bayonets, these have fullers extending through the end of the bayonet. Later versions used specifically made blades with shorter fullers

During the proving of the Lithgow machinery COLT marked blades were made.

 

Quillioned 1907 Naval marked but some marking seem to indicate Australian use

 

Pommel mark, 3? 3 is also district for New South Wales mark seen on throat piece see below

 

 

AC maker is early scabbard producer, scabbard has N mark so is probably the original scabbard, probably with chape replaced with external chape rather than early internal one.

 

 

Scabbard shows Sold from Service mark, was it sold to Australia?

 

N mark on ricasso rather than the later pommel marks seen, this is period correct

 

NSW mark on throat ahs similar 4 digit serial to pommel although not matched but close

 

 

10 1908 shows very early made example

UK 1907 colt quillion.jpg (44101 bytes)UK 1907 colt pommel mark.jpg (8952 bytes)UK 1907 colt quillion close.jpg (79768 bytes)UK 1907 colt quillion close 2.jpg (82811 bytes)

Mint COLT manufactured 1907 with quillion, thought to be manufacturers sample due to the total lack of wear - Many thanks to Ronnie Wilson for these pictures

Pommel stamp of Colt blade, also seen on grips

There is some doubt now on the explanation for the Colt marking, and that it was actually put on a presentation blade for the inspector visiting the factory rather than pre production items

 

Left side of Quillioned Colt

 

Right side of quillioned Colt

Australian 1907 dble.jpg (59924 bytes)Australian 1907 dble ricasso stamps.jpg (79930 bytes)Australian 1907 dble stitch scabbard detail.jpg (71305 bytes)

1920 Lithgow with double stitched scabbard

 

Ricasso marks on Lithgow

 

 

Stitch line on both sides of scabbard

A Trials bayonet, this has good quality steel but a rough finish, another example examined at the same time had a better quality finish but had a different cross guard

courtesy Colin

 Standard pattern 1907 bayonet

 

This bayonet is an unknown one based on the 17" Trials bayonet, it does not however have the correct markings and there are some dimensional differences.

 

 

Later model of the OWEN with the short made fullers, early pattern blades are identical with the exception of the fuller length.

 

CANADA

With the withdrawal of the ROSS rifle from service the Canadians bought UK produced SMLE's with pattern 1907 bayonets with quillions, these having been declared obsolete by UK in 1913 with the removal of the quillion from the 1907 pattern design. They also bought large numbers of the post 1913 quillion removed version of the bayonet. All Canadian blades have a Arrow C on the Pommel

 

Canadian issue 1907 made by VICKERS

 

Vickers Markings

 

CHINA

China used 1907 pattern blades and bayonets to make their 1920 bayonet. Additionally they made their own blades based on the 1907 style. These blades are heavily blued but have heavy grinding marks from the hand making of them. They are unmarked.

 

China 1920.jpg (64803 bytes)1920 model based on UK 1907 / Japanese Ariska style blade.

 

EGYPT

After WWI Egypt used the SMLE rifle and bayonet.

 

Arabic serial on pommel of UK 1907, thought to be Egyptian

 

 

Ricasso marks on 1907 show it to be new made in 1928 by Sanderson and blued to old original style not UK style of period

 

 

GERMANY

During WWI the Germans used captured SMLE's and bayonets for rear echelon and support troops. They even made an all steel (Ersatz pattern) all steel scabbard.

Pre WWI a trial run was made of the 1907's for export sales by E&F Horster, only a limited number were made and the scheme was not carried forward.

 

 

INDIA

The Indians made large numbers of the 1907 pattern bayonet and variations of it. These are often mis identified and given a wide profusion of descriptions. The following list is based on that given by Skennerton in his book on Commonwealth bayonets.

Initial production of the 1907 pattern blade was started in 1914 and the Ricassos are marked RFI. It is possible to find the blades marked with RFI (Rifle Factory Ishapore), NWR (North West Railways), MIL (Metal Industries Lahore) and JU (Jhelum Arsenal).

1907 identical to the UK 1907 blade

Indian Pattern 1907, was an unfullered blade with slightly different grips produced in 1917 for limited trials

No 1 Mk I       - Redesignation of 1907 patter blade in 1926

Mk I*     - As I with blade shortened to 12.2", fuller runs through point

No 1 Mk I**   - As I* with 2" false edge

No 1 Mk II      - New made 12.2" blade no fullers

No 1 Mk II*    - as Mk II with false edge

No 1 Mk III     - New made 12.2" blade no fullers and square pommel

No 1 Mk III*   - Mk III with false edge

No 1 Mk IV     - ?

No 1 Mk V      - ?

No 1 Mk VI     - No 1 Mk I grip and cross guard with bowie pointed No 5 blade

No 1 Mk VI*   - No 1 Mk VI without Fuller.

 

The USA supplied large numbers of  1914 pattern rifles and bayonets to India in WWII, some of these bayonets were converted by fitting a 1907 pattern crossguard but retaining the origianl grips

 

Note however that the standards of marking are poor and blades have been seen with marks other than those above. It should be noted that many of the blades for sale come without scabbards.

Very early RFI made 1907, probably a de hooked one this one came out of Afghanistan

India 1907 made by RFI in 1919

added 9/8/02

No 1 Mk I* marked DP for Drill purpose.

Wilkinson made 1907 in Indian brass mounted scabbard

 

 

Locket and Chape were both Brass made rather than the steel of the normal 1907 scabbard

added 30/11/03

1956 marked rework of a Wilkinson 1907, converted into a MkI**

added 24/5/03

No 1 Mk II

No 1 Mk II made by NWR in 1943

Previously unrecorded in the books a MIL made MKII without a false edge.

No1 MkII* made by MIL

added 12/10/2002

MkIII without a false edge based on an RFI made MkII blade. Distinctive MkIII pommel is used as decider on bayonet designation

One of the 1914 pattern US supplied bayonets converted by the replacement of the original cross guard with the lower 1907 pattern one. Indian markings were placed on the  Pommel

 

 

1907 low muzzle ring but 1914/1917 grooved grips

 

191? model mark

added 13/08/02

INDONESIA

Indonesian used 1907 made by Australia. Scabbard is made from wood and uses the original locket from the 1907 scabbard. The 1907 on the ricasso is interesting but it is not known its significance

IRAN

Like Egypt Iran used the SMLE rifle and bayonet, after WWI

 

 

 

IRAQ update 21/08/2002

Like Egypt Iraq used the SMLE rifle and bayonet, after WWI

Ex UK issued 1907 with Arabic text and new all leather scabbard. This was picked up outside Baghdad by a US trooper.

Any translation of lettering or identification of he button on the strap of the scabbard would be appeciated.

unknown 1907 conversion.jpg (48897 bytes)unknown 1907 conversion scabbard.jpg (53145 bytes)

Modified 1907. Modifications consist of an additional stud through the grips, and the reversal of the leather to give the seam at the front, the locket and chape have been re attached with rivets and not the staples used on UK scabbards.

 

Scabbard modifications

Distinctive but unknown marking on bayonet, This markings similar to the Iraq Air Force marking and it is this which I have used to tentatively identify this blade as Iraqi, unless someone can tell me differently .

Note that Skennerton's book on markings show a Triangular marking as being Iraq in nature

8-5-2004 marking identified as that of the Iraqi National Congress opposition party (http://www.globalsecurity.org/military/world/iraq/insignia.htm)

 

ITALY

After WWII Italy used the SMLE rifle and bayonet. They made a bayonet for the SMLE using a 1907 style hilt with a Carcano blade. The scabbard used the 1907 pattern leather and chape with a Carcano throat. See Italy

 

Bayonet made using Carcano blade hilted to suit the SMLE rifles supplied to Italy after WWII, scabbard is UK scabbard with M44 makers marks that has been cut down and an Italian Carcano throat fitted.

 

Hilt modified to fit onto the SMLE rifle

 

NEW ZEALAND

In WWI New Zealand Troops were issued with UK produced 1907 pattern bayonets, and to a much lesser extent Australian made bayonets. Some were marked N^Z on the pommel. Very few Quillioned blades were issued to New Zealand troops.

 

Dress 1907 all chromed with plastic coated hilt and scabbard, not sure if chroming is NZ or UK

 

 

 

 

Pommel is marked NZ for New Zealand issue

 

 

Pommel is unit marked

Pommel Markings on a New Zealand issue 1907 made in the UK

 

NORWAY

During WWII the Norwegian resistance were dropped SMLE rifles and bayonets to allow them to resist the German occupiers. Apparently the Norwegians did not like the blades and typically discarded them. It is doubtful if they carry any Norwegian markings. There are 1913/17 pattern bayonets that have a modified scabbard to fit American style webbing. See under Norway

 

 

 

SIAM

In 1920 BSA (British Small Arms) fulfilled a contract with SIAM for the supply of 10,000 rifles and bayonets. The contract was filled by re furbishing ex UK blades. They are marked with the Wild Tiger Corps emblem (a tigers head) and script which includes the rifle number. Although issued in standard Leather with steel mounts, the climate meant these rapidly degraded and the leather was replaced with thin steel, with the original mounts brazed back on the ends. 

 

Siam 1907 close up.jpg (90166 bytes)Siamese 1907 with steel scabbard.

 

 

Ricasso Tigers Head Mark

 

SOUTH AFRICA

South Africa used UK supplied 1907's during WWI. Examples of most UK makers have been noted in the references, as well as the possibility of Remington made versions.

During WWII South Africa made limited numbers of it's own 1907 pattern bayonets, both by SAR (South African Railways) and AECO, with locally made scabbards. I also have  a WWII Australian made blade with South African markings. South African Markings are an M in a U

 

SAR Made 1907

 

WWII Australian made 1907 issued to SA unit

 

 

SA made Frog on UK made 1907 pattern blade

AECO Made version

 

TURKEY

Turkey used large numbers of 1907's either captured during the WWI battles or purchased between the wars. As typical of Turkish blades many of these were modified to fit the 1935 rifle, by shortening the blade to 250mm, and fitting a modified cross guard to suit the rifle. Many are quoted as Gallipoli captures but care should be taken on the dates etc. of the blades, plus many of the Australian troops were actually issued UK blades and not Australian due to the limited numbers of Australian made blades in service at this time. Blades can be found in both full size and in the reduced and modified size.

unknown 1907 conversion markings.jpg (56695 bytes)Pommel and cross guard markings.
Australian made 1907
1907 Pattern marks on Ricasso
Australian makers mark and converted crossguard
Turkey converted 1907.jpg (85973 bytes)UK 1907 converted to '35 standard bayonet
Turkey converted 1907 27 date stamp.jpg (94804 bytes)1927 marks on blade show this is post war purchase and not WWI captured blade, bayonet is originally made 1915

 

UK

The 1907 pattern bayonet came at the end of a series of trials of various bayonet types. The final pattern is clearly heavily influenced by the Japanese Ariska Type 30. The initial production started in January 1908 and had a curved Quillion as the Ariska. Production of these was carried out by Enfield (the largest producer), Wilkinson, Sanderson, Chapman, Vickers and Mole. Initial scabbards had a hidden chape but this was changed in 1908 to the external chape normally seen. Note fakes of these are regularly turning up due to the extra value to the collector of the quillioned blades.

In 1913 it was decided to remove the hooked quillion from production blades, without changing the designation. As blades went through repairs or re-furbishment they had the quillions removed (or as noted above sent to Canada) they had the quillions removed, and early made versions can be found with the quillion ground off. By the end of  WWI Vickers had finally commenced production of the 1907, these appear to have a markedly larger Oil hole in the pommel as well as the Vickers Ricasso markings note that when measured the cleaning hole is the same size as all other 1907's it does however have a countersunk surface giving the appearance of a larger hole

In 1914 a Drill Purpose bayonet with a 1/4" shorter blade and more rounded point was approved. Such blades are marked DP.

In 1915 Remington made 1907's arrived from the USA and are clearly  marked as such. These should not be confused with the Remington 1913 pattern blade which does not fit the SMLE but is for the 1914 pattern rifle and has a different crossguard. American made scabbards by Jewell and Grafton can be found with either Remington of UK made blades.

In 1924 trials were made of a shortened 1907 pattern bayonet for the Farquhar-Hill automatic rifle, the blade being shortened to 290mm, very few were made and fakes are known (mine is a fake)

In WWII the 1907 was again manufactured by Wilkinson to fulfil  a contract for the Admiralty. These are marked S294 WSC (the makers code for Wilkinson).  Additionally a 1907 shortened to 427mm form the same period has been recorded.

During it's life there were several authorised finishes to both scabbards and blades. Blades can be found in the white, polished, parkerised, blued (fully and partially), chromed or blackened (admiralty). And these finishes could be original or applied during re-furbishment. For scabbards Patent leather finishes, wax, and "matt" finishes in brown and black are all possible, and earlier scabbards were refinished in the finish of the day as appropriate.

UK 1907 relic.jpg (56809 bytes)UK 1907 relic 1907 stamp.jpg (88507 bytes)UK 1907 relic Pommel marks.jpg (80783 bytes)

Relic condition 1907 with quillion

 

Ricasso mark showing April 1908 manufacture date

 

 

Pommel marks XXX over R.X 

 

1911 produced 1907 with re-sharpened broken blade

 

Broken point has been re-sharpened

 

 

Ricasso marks, pommel mark indicate its use by a Nottinghamshire? regiment 1 NOT

 

Interesting unfinished 1907, the pommel has been left totally unfinished, this may identify the unknown pair of more finished bayonets I already have. There are no marks on this blade at all.

Enfield 1913 made quillioned 1907 in original MkI scabbard with internal chape

 

Internal chape and Kings Royal Rifle corps pommel markings

 

 

Original Buff leather frog

Original 1907, EFD marked 1911 with Quillion 

Fake quillion 1907, based on a 1944 Admiralty contract blade (quillions ceased in 1913!)

Wilkinson Pall Mall stamped 1907

Uk1907 admiralty markings.jpg (88048 bytes)

Markings on 1944 made Admiralty contract 1907

UK WWI production 1907 cut down to 10" complete with scabbard, the purpose and provenance is unknown

 

Enfield EFD marking on spine of cut down bayonet

uk 1907 HG  Chapman.jpg (80463 bytes)uk 1907 HG  machined pommel side.jpg (83247 bytes)uk 1907 HG  machined pommel.jpg (70008 bytes)

Chapman made 1907 used by Home guard in WWII

 

 

Pommel and ring were modified for an unknown firearm

 

 

Rough machining on pommel and flat on top of muzzle ring

UK 1907 false edge clsoe up.jpg (95705 bytes)

False edge grinding on 1907

Three variations of frog for the1907

1907 issued to the officers training college at Stonyhurst school. I have now found out that the school can possibly trace the piece to its original "owner" and his military history. The blade will be going on display at the school as they have no example left at the school

UK Farquhar trial.jpg (105798 bytes)

Fake Farquhar-Hill trials bayonet

UK 1907 Remington.jpg (119734 bytes)UK 1907 Remington markings.jpg (135180 bytes)

Remington made 1907 with chromed blade and black painted scabbard, possibly for parade use.

 

 

Remington Ricasso markings showing August 1915 makers date

uk 1907 raf marked.jpg (120431 bytes)uk 1907 raf markings.jpg (101160 bytes)

RAF marked Sanderson made bayonet, like the Remington this has been highly polished

 

 

RAF stamp on scabbard throat

 

RAF markings on a 1907 bayonet

 

Mole manufactured 1907

 

MOLE makers stamp lightly impressed on ricasso

 

WSC 1942 made 1907, which has been chromed for parade use

 

Ricasso marks the WSC is not combined with the more common S294

JAC marked 1907

 

 

Beech grips on JAC bayonet

JAC made 1907 with RR stamps, there are no manufacture dates on this blade and the RR stamp is unusual for a 1907

 

 

opposite ricasso of 1907 shows no issue stamps either, if never issued why then reduced in status

M44 makers stamp on throat piece on 1907 scabbard

 

Late date of manufacture of this scabbard is evident form the compression marks on the throat rather than the more normal riveted fixings

Remington 1917 fitted with home guard frog and 1 OTC pommel marks

 

Home guard frog on US pattern 1917 scabbard

uk 1907 raf marked.jpg (120431 bytes)uk 1907 raf markings.jpg (101160 bytes)

RAF marked Sanderson made bayonet, like the Remington this has been highly polished

 

RAF stamp on scabbard throat, these were used by airfield security troops of the RAF regiment

UK double stitched scabbard markings.jpg (40197 bytes)

Front view of double stitched UK scabbard made by HRG, found on 1913 Remington bayonet.

1907 with replacement brass grips

 

Ricasso shows 1923 rework date so the grips are dated after this, could they be for ceremonial use or a home guard modification, there are at least 3 of these blades that I know of. Blade is highly polished and is probably period as brass has been allowed to tarnish

 

Originally issued to the Kings Royal Rifles

 

 

Grips are riveted and not crew fixed

Ex territorial marked 1907 with replacement bone grips, plated blade and refinished pommel and cross guard. The press stud has been replaced as it is a very poor fit, and the original pommel marks partially removed leaving the T for territorial being the only clearly remaining mark

Interesting rubber 1907 for film use. bayonet is styled on the early quillioned 1907

 

but hilt and cross guard modifications means it probably fits the P13/P17 rifle and not the  original SMLE, the quillioned blades were never made for these pattern rifles.

 

 

Hilt has been machined down

 

Original blade copied is RAF marked and has the pommel oil hole, neither of which would be found on a quillioned 1907

One that was photographed for my CD and now part of my collection, late WSC made 1907, locket has used late compression fit locket but used the older style locket with the 3 rivet holes.

Ex territorial marked 1907 with replacement bone grips, plated blade and refinished pommel and cross guard. The press stud has been replaced as it is a very poor fit, and the original pommel marks partially removed leaving the T for territorial being the only clearly remaining mark

  

 

UNKNOWN

E-mail me

Two Unknown bayonets based on the 1907 pattern blade

Although this bayonet uses a 1907 pattern blade there are no makers marks etc on the blade, only a bending mark. Pommel shape is similar to an unfinished blade shown in ABC

 

Grips are fixed using oval washers and a single sided screw, these are similar to the Japanese Arisaka fittings. The pommel fittings to mount on the rifle are missing

 

 

Right grips show no sign of fixings. The pommel shape is also reminiscent of the Japanese Arisaka although much heavier

An essentially identical blade, for use as a side arm as it has no fittings other then the Muzzle ring to mount it on the rifle

 

 

Bend mark is evident on both blades

 

Shape of pommel and grips is identical to the bayonet above

 

 

It appears that the hole in the pommel for the press stud may have been filled with braze. Although roughly made, the grip screws on both blades have been set to align

Another 1907 pattern bayonet with no marking to indicate maker or user. The blade is very coarsely finished

 

Hilt etc. is almost identical with my previously obtained "No6" trials blade

 

 

Shape of blade is only rough ground and is not that of any other 1907 blades in my collection

An unknown scabbard for a 1907 pattern bayonet. It is is of very high quality and is not a Siamese or German Ersatz one (known version anyway). The quality of the workmanship does not indicate Turkish although they did use the 1907 and made steel scabbards for shortened ones if you have any ideas please let me know Photographs courtesy of Jim Doherty

unknown steel scabbard for 1907.jpg (10824 bytes)unknown steel scabbard for 1907 throat.jpg (36168 bytes)unknown steel scabbard for 1907 bottom.jpg (35384 bytes)

Steel scabbard of unknown origin

 

Uses throat from early pattern scabbard

 

Bottom of scabbard shaped to imitate chape on original leather scabbard

One suggestion is that this scabbard is for the VTC bayonet, which was essentially an 07 blade with an 1888 hilt